Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Start the engine for a few minutes to warm the oil, making it less viscous and facilitating its subsequent removal. Using a 17 mm spanner, unscrew the bolt located centrally underneath the bike (see video) that acts as a plug for the drain hole. Remember to prepare a container to collect the used oil. Immediately open the upper fill hole by unscrewing this bolt as well: you must do this to allow air circulation in the oil tank and avoid a vacuum. Close the drain hole, measure the amount of oil that has come out, and refill the same amount of new oil through the upper hole.

Updated on 23 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil and Oil Filter on the Keeway Superlight
How to Change the Engine Oil and Oil Filter on the Keeway Superlight
Superlight This guide will show you how to carry out the routine maintenance service by changing the engine oil and oil filter on the Keeway Superlight motorcyc…
How to refuel a Keeway Superlight 125
How to refuel a Keeway Superlight 125
Superlight Before you can start, take your Keeway Superlight 125 to a petrol station. Begin by inserting the motorcycle key into the lock on the fuel tank cap, …
How do you replace the air filter of the Keeway Superlight?
How do you replace the air filter of the Keeway Superlight?
Superlight In order to replace the air filter of the Keeway Superlight, you will need to loosen the screws that secure the cover of the filter box to its housin…

What Does the V-Belt Light Indicate on a Yamaha NMAX Scooter and How to Remove It?

If the V-BELT light has illuminated on the instrument cluster of your Yamaha NMAX scooter, it means it is time to replace the drive belt as it has exceeded the relevant interval. You can entrust this maintenance task to your trusted workshop; the cost will not be particularly excessive. Once this is done, you can manually reset the light by following the procedure shown in this tutorial. First, turn on the instrument cluster, then repeatedly press the left button on the dashboard to reach the service interval in question. At this point, press and hold the right button once to initialise the reset, and a second time to complete it.

Watch the video!


by ScegliAuto

More videos