Do it yourself
Frequently asked questions about cars and motorcycles

Model: Keeway Rkv 200
Part: Engine oil

To change the engine oil on a Keeway RKV, loosen the drain plug located at the central lower part of the bike, allowing all the used oil to drain into a suitably positioned container. Once all the oil has completely drained, close the drain plug and insert the new oil through the designated filler hole. This is located on the right side of the bike, just below the seat: after adding the necessary amount of oil, close this vent with the corresponding plug.

Updated on 3 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Rkv 200 To change the engine oil in a Keeway RKV 200, loosen the drain plug of the oil tank, located at the central bottom of the bike: once this plug is uns…
Rkv 200 Below are the main instructions for performing routine maintenance by replacing the engine oil and oil filter on the Keeway Rkv 200 motorcycle. First…
Rkv 200 In order to replace the headlight bulb of the Keeway RKV 200, you need to loosen the screws that secure the front fairing of the motorcycle to its ho…

Dismantling and Replacing the Front Cowl of the Kymco Super8 150

Follow these simple steps to dismantle and replace the front cowl of the Kymco Super 8 150 scooter. First, place the scooter on the centre stand and start unscrewing and removing the screws located at the rear of the front cowl; then unscrew the additional screws found underneath, first removing the cover situated above the front headlamp and then the rest of the remaining cowl, as shown in the video. At this point, install the new front cowls, securing all components correctly, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos