|
Do it yourself
| |||
| ||||
Model: Keeway Rcs 125
To change the engine oil of the Keeway RCS 125, loosen the drain plug of the oil sump located at the bottom centre of the bike. Once the plug is removed, collect all the used oil in a suitably placed container. Next to the drain plug, you will find the oil filter, which can be completely removed and replaced with a new one. After the replacement, close the drain plug and top up through the breather located on the left side of the bike.
Updated on 18 August 2026 by ScegliAuto
Video tutorial
Related tutorials
Rcs 125
To replace the piston of the Keeway RCS 125, loosen the screws securing the cylinder of the engine block to its housing at the top. Once the cylinder…
Rcs 125
To disassemble the engine of the Keeway RCS 125, you need to loosen the screws that secure the block to its housing, so that it can be removed after …
Rcs 125
The procedure for replacing the piston on the Keeway RCS 125 is carried out by loosening the screws that secure the cylinder of the engine block to i…
|
How to Change the Engine Oil on a Ducati Hypermotard?
You can change the engine oil on a Ducati Hypermotard by loosening the drain plug located at the central lower part of the bike: once the plug is unscrewed, you can let the used oil flow completely into a container placed underneath. Once the plug has been removed, you can proceed by sliding the oil filter out of its seat to insert the new one; at this point, you can continue with the top-up, pouring the necessary amount of oil through the breather on the left side of the bike. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.082
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
