Do it yourself
Frequently asked questions about cars and motorcycles
To change the gear oil on a Keeway Icon, loosen the bolt securing the drain plug on the lower right side of the transmission casing. Once this plug is removed, all the used oil can be drained into a container. After the oil has drained out, you can top it up by pouring it through the same drain hole; you will need to push the fluid in using a pump. Once the necessary amount of oil has been added, check that everything is functioning correctly.

Updated on 30 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Icon In order to replace the engine oil of the Keeway Icon, you need to loosen the drain plug located in the central lower part of the motorcycle, so that…
Icon To replace the motor oil on the Keeway Icon, you need to loosen the drain plug of the oil tank, which will be located in the central lower part of th…
Icon The procedure for replacing the gearbox oil of the Keeway Icon involves loosening the drain plug of the transmission housing, located at the bottom o…

How to Replace the Key Battery on a BMW R1250GSA

To replace the key battery on your BMW R 1250 GSA, start by locating the opening slot on the key. Once you have found the slot, use a small screwdriver or a coin to carefully pry open the key. Find the existing battery and remove it carefully. Ensure you insert the new battery with the correct polarity. Close the key securely and check that it is properly sealed. Finally, test the key to ensure it works correctly. If in doubt, consult the owner's manual for detailed instructions.

Watch the video!


by ScegliAuto

More videos