Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Keeway K Blade 125
Part: Shocks

To replace the rear shock absorber on the Keeway K-Blade 125, loosen the screws that secure this component to its housing: the screws are located near the rear mudguard and the swingarm. Once loosened, you can remove the old shock absorber from its housing and insert the new one; after installation, secure the new shock absorber in place using the appropriate bolts that were just removed, ensuring everything functions correctly.

Updated on 5 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Shock Absorber on a Keeway K-Blade 125?
How to Replace the Front Shock Absorber on a Keeway K-Blade 125?
K Blade 125 .. replace the front shock absorber on a Keeway K-Blade 125, loosen the bolts securing the central axle of the front wheel so that it can be completely.. …
How to replace the air filter on the Keeway K-Blade 125?
How to replace the air filter on the Keeway K-Blade 125?
K Blade 125 .. On the Keeway K-Blade 125, replacing the air filter involves unscrewing the screws that secure the cover containing the.. …
How to Change the Gear Oil on a Keeway K-Blade 125?
How to Change the Gear Oil on a Keeway K-Blade 125?
K Blade 125 .. To change the gear oil on a Keeway K-Blade 125, loosen the bolt that secures the oil drain plug located near the rear wheel of the bike, right.. …

Servicing a Honda SH300 Scooter

How to service the SH 300 scooter. This operation should be done with the engine cold. Remove the cover and take out the air filter, cleaning the compartment where the new one will be placed. Refit the three screws you removed earlier and reassemble the cover. Remove the oil cap, take a 12 mm spanner and unscrew the oil plug from underneath. Allow the oil to drain into a suitable container, which you will then dispose of at an authorised centre. Remove the filter, clean the cavity where the new one will be fitted, and tighten it with the spanner. Refit the oil cap screw. Always change the washer on the cap. Now, refill with oil. You will need a synthetic oil like Motul 5100 10W40, which costs £12.40 per litre on Amazon. If you are doing a complete change, you will need two cans, as you will require 1.6 litres including the filter. After adding the oil, let it rest for a few minutes, then run the engine for a few minutes and check the level. If necessary, top it up: it should be halfway between min and max.

Watch the video!


by ScegliAuto

More videos