Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Keeway Rcs 125
Part: Engine

In order to remove the engine of the Keeway RCS 125, you must first loosen the screws that secure the side protection panels that make up the fairing, so that you can locate the engine block underneath: this must be freed from its supports by loosening the screws that secure it to its supports. Once the engine has been freed from its seat, you can disconnect all the connectors related to the sensors; then you can also detach the intake and exhaust pipes. At this point, you can insert the new engine block, securing it and connecting it properly.

Posted on 5 August 2024 by ScegliAuto

Video tutorial

Related tutorials

How do you disassemble the engine of the Keeway RCS 125?
How do you disassemble the engine of the Keeway RCS 125?
Rcs 125 To disassemble the engine of the Keeway RCS 125, you need to loosen the screws that secure the block to its housing, so that it can be removed after …
How to Change the Engine Oil of the Keeway RCS 125?
How to Change the Engine Oil of the Keeway RCS 125?
Rcs 125 To change the engine oil of the Keeway RCS 125, loosen the drain plug of the oil sump located at the bottom centre of the bike. Once the plug is remo…
How to Replace the Piston of the Keeway RCS 125
How to Replace the Piston of the Keeway RCS 125
Rcs 125 To replace the piston of the Keeway RCS 125, loosen the screws securing the cylinder of the engine block to its housing at the top. Once the cylinder…

What Does the V-Belt Light Indicate on a Yamaha NMAX Scooter and How to Remove It?

If the V-BELT light has illuminated on the instrument cluster of your Yamaha NMAX scooter, it means it is time to replace the drive belt as it has exceeded the relevant interval. You can entrust this maintenance task to your trusted workshop; the cost will not be particularly excessive. Once this is done, you can manually reset the light by following the procedure shown in this tutorial. First, turn on the instrument cluster, then repeatedly press the left button on the dashboard to reach the service interval in question. At this point, press and hold the right button once to initialise the reset, and a second time to complete it.

Watch the video!


by ScegliAuto

More videos