Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Kia
    3. :
  3. Carens
    4. : Warning light – error code

Kia Carens - Warning light – error code

Warning Light – Error Code Kia Carens (2013-2019 / mk 3)

Kia Carens (2013-2019 / MK 3)
How to Reset the Air Filter Light on a Kia Carens
The air filter light activates on the dashboard or onboard computer of the Kia Carens when manual purification of the filter is required. To perform this …Read all…
Posted on 9 March 2026 by ScegliAuto
Kia Carens (2013-2019 / MK 3)
How to Reset the Oil Light on a Kia Carens 3
To correctly complete the manual reset of the oil light on your Kia Carens Mk3 (2013-2019), follow the steps described in this mini guide. First, enter the …Read all…
Posted on 13 August 2026 by ScegliAuto
Kia Carens (2013-2019 / MK 3)
How to Perform a Factory Reset on the Kia Carens
If the onboard computer in your Kia Carens (2013-2019) is not functioning correctly due to software errors, you can try to resolve this by performing a quick …Read all…
Posted on 21 August 2026 by ScegliAuto
Kia Carens (2013-2019 / MK 3)
How to Reset the Service Light on Kia Carens
In this video tutorial, you can see how to reset the oil light on the Kia Carens. The first thing to do when this light comes on is to change the engine oil …Read all…
Posted on 19 July 2026 by ScegliAuto
Airbag (1) Transmission (1) Timing belt (1) A/C controls (1) Checks and maintenance (2) Cabin air filter (3) Oil filter (1) Parking brake (1) Light bulb (2) Headlight bulb (4) Clock (1) Door trim panel (2) Brake pads (2) Wheel (4) Fuse box (11) Warning light – error code (4) Tire pressure warning light (8) Service warning light (13)

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos