Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Kia
    3. :
  3. Carens
    4. : How to perform a service reset on Kia Carens

Kia Carens - Video tutorial

Model: Kia Carens MK 3 - Years 2013-2019
Part: -board computer
Operation: How to perform a service reset on Kia Carens

In this video tutorial we can see how to reset the oil warning light on Kia Carens, the first thing to do when this warning light comes on will be to change the engine oil and filter. Subsequently, after performing the do-it-yourself service, get in your car and put the handbrake; use the buttons on the steering wheel (the book-shaped button) to scroll through the navigation menu until you reach the item concerning maintenance; now press the key located under the book-shaped key; keep it pressed for about 5 seconds; at this point a message appears if we want to carry out the Reset, so press the button again to confirm.


Posted on 18 May 2024 by ScegliAuto



How to reset the service in the KIA Carens?
Kia Carens (2013-2019 / MK 3) In this tutorial we can see how to reset the service in the KIA Carens, an extremely simple and fast operation, to be performed only after completing
How to restore the service indicator on the Kia Carens
Kia Carens (2013-2019 / MK 3) In this video, it is shown how to reset the maintenance light on the 2014 Kia Carens. This procedure is very simple and quick to perform. First, you
Kia Carens service light reset
Kia Carens (2013-2019 / MK 3) In this short and simple guide we will see how to reset the Kia Carens service light, following the instructions below. First of all, we get on board

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos