Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the bulb of the Kia Picanto.

Model: Kia Picanto TA, MK 2 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Headlight bulb

See other generations:
Video tutorial

In this article, we will illustrate how to replace the bulb of the Kia Picanto. For this operation, no tools are needed.

First, you need to lift the hood and secure it with the appropriate locking pin, then you need to remove the bulb protection cover located at the back of the headlight, rotate it half a turn counterclockwise and then remove it. Once removed, you need to disconnect the connector, after removing the connector, you need to lift the bulb fixing bar and then remove the bulb.

Now replace the bulb, lock it with the bar, reconnect the connector and reinsert the locking cover, rotating it half a turn clockwise to lock it.


Posted on 1 April 2025 by ScegliAuto


Related tutorials

How to replace the headlight bulb on a Kia Picanto?
How to replace the headlight bulb on a Kia Picanto?
Kia Picanto (2004-2011 / MK 1, 2A) To replace the headlight bulb on a Kia Picanto, open the bonnet to access the engine bay and remove the circular plastic cover located at the back of…
How to Remove the Front Position Light Bulb of a Kia Picanto?
How to Remove the Front Position Light Bulb of a Kia Picanto?
Kia Picanto (2011-2018 / TA, MK 2) Good morning, today's objective is to remove the front position light bulb of your Kia Picanto. Start by lifting the front of the car with a jack. Th…
How to Replace the Front Headlamp Bulb in a Kia Picanto
How to Replace the Front Headlamp Bulb in a Kia Picanto
Kia Picanto (2011-2018 / TA, MK 2) Replacing the left front headlamp bulb in a Kia Picanto is a very simple and quick task to perform independently. Start the procedure by turning the …

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos