Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the tire pressure light of the Kia Sportage?

Model: Kia Sportage QL, MK 4 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Tire pressure warning light

See other generations:
Video tutorial

The tire pressure warning light that appears on the instrument panel of the Kia Sportage will need to be inflated to the recommended pressure value: for this car model, the recommended inflation pressure for each tire will be indicated on the sticker attached to the driver's side door pillar.

Once the tire pressure has been adjusted to the correct value, you can turn on the instrument panel to verify that the new pressures are being stored by the sensors.

It may be necessary to drive a few meters to allow the sensors to read the pressure values.


Posted on 6 April 2025 by ScegliAuto


Related tutorials

How to Reset the TPMS Light on a Kia Sportage
How to Reset the TPMS Light on a Kia Sportage
Kia Sportage (2016-2022 / QL, MK 4) Today, you will learn how to reset the TPMS light on a Kia Sportage. The tyre pressure light illuminates when there is a change in the pressure of on…
Resetting the TPMS Light on a Kia Sportage
Resetting the TPMS Light on a Kia Sportage
Kia Sportage (2016-2022 / QL, MK 4) Today's guide will show you how to reset the tyre pressure warning light on a Kia Sportage; before performing the reset, ensure all four tyres are at…
How to reset the tire pressure sensor on the Kia Sportage
How to reset the tire pressure sensor on the Kia Sportage
Kia Sportage (2016-2022 / QL, MK 4) In this short guide, we will discover the procedure for resetting the tire pressure warning light of the Kia Sportage; before performing the TPMS sen…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos