Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of front brake discs and pads of the Kia Picanto.

Model: Kia Picanto TA, MK 2 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Brake rotors

See other generations:
Video tutorial

Today's main instructions will show us the process of disassembling and replacing the front brake discs and pads of the Kia Picanto. First, we lift the vehicle and remove the front wheel; then we unscrew the bolts of the front brake caliper, removing it from the disc, as shown in the video.

At this point, we unscrew the bolts of the disc to remove it as well, replacing it with the new one; we then reassemble the new brake pads, compressing the caliper piston and cleaning off any remaining dirt, following the video tutorial until the end!


Posted on 8 April 2025 by ScegliAuto


Related tutorials

Replacing Brake Pads on Kia Picanto
Replacing Brake Pads on Kia Picanto
Kia Picanto (2004-2011 / MK 1, 2A) Replace the brake discs on a Kia Picanto. Remove the car wheel to change the brake parts. Lift the vehicle using a jack to the desired height, then r…
How to replace the clutch on the Kia Picanto
How to replace the clutch on the Kia Picanto
Kia Picanto (2011-2018 / TA, MK 2) This guide provides instructions for removing and replacing the clutch kit on the Kia Picanto. First, open the bonnet of the vehicle and start by rem…
How to Adjust the Handbrake on a Kia Picanto
How to Adjust the Handbrake on a Kia Picanto
Kia Picanto (2011-2018 / TA, MK 2) This video shows the procedure to adjust the handbrake on a Kia Picanto. First, remove the cover located in the cup holder of the centre console, beh…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos