Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front brake pads of the Kia Carens.

Model: Kia Carens MK 3 - Years 2013-2019
Part: Brake pads

Let's discover in this guide the instructions that will allow us to dismantle and replace the front brake pads of the Kia Carens. First, we lift the vehicle and start removing the front wheel; then we unscrew the two fastening screws of the brake caliper located on its rear, applying pressure on the caliper piston to retract it. Once the brake caliper is removed, we will also take out the pads, cleaning the caliper of any residual dirt; we then install the new original brake pads, finally reassembling the caliper and the wheel.

Posted on 27 December 2025 by ScegliAuto

Video tutorial

Related tutorials

How to adjust the handbrake lever of the Kia Carens
How to adjust the handbrake lever of the Kia Carens
Kia Carens (2013-2019 / MK 3) In this guide we will see the instructions that will allow us to adjust the handbrake lever of the Kia Carens. First of all, we get on board the car …
Where is the fuse box of the Kia Carens 3 located?
Where is the fuse box of the Kia Carens 3 located?
Kia Carens (2013-2019 / MK 3) If you own a third edition Kia Carens and want to locate the fuse box located inside the engine compartment, all you have to do is follow these steps…
Where are the fuses located in the Kia Carens?
Where are the fuses located in the Kia Carens?
Kia Carens (2006-2013 / MK 2) Each fuse in the Kia Carens is located inside one of the dedicated fuse boxes present in the vehicle: there are two in this type of vehicle. The firs…

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos