Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Fix AdBlue Fault P2483 - P2482 - P1F32 on a Kia Sportage

Model: Kia Sportage MK 5, NQ5 - Years 2021-2026
Part: AdBlue warning light

On the Kia Sportage in the video, the AdBlue warning light illuminated, and the diagnosis showed errors P1F3200 (exhaust gas temperature sensor - low/high circuit); P248300 (same sensor, bank 1 sensor 5); P248200 same sensor, high circuit). A visual inspection followed, revealing a physical cause. The connector for temperature sensor no. 5 was damaged, evidently broken previously and poorly repaired with insulating tape. Additionally, there was sulfate and moisture present, causing false contacts. An AdBlue injector was deformed, likely after an impact, with solidified liquid leakage. The wiring was repaired by bypassing the broken connector. The AdBlue injector was cleaned, and the damaged injector seat was straightened. Error codes were cleared, and the warning light turned off.

Posted on 26 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the AdBlue warning light on the Kia Sportage?
How do you reset the AdBlue warning light on the Kia Sportage?
Kia Sportage (2016-2022 / QL, MK 4) To reset the AdBlue light on the Kia Sportage, you need to add the necessary amount of additional fluid to the corresponding tank: to reach it, you w…
How to reset the AdBlue warning light in the KIA Sportage?
Kia Sportage (2021-2026 / MK 5, NQ5) If the AdBlue warning light has come on in the instrument panel of our KIA Sportage, it means that the anti-pollution system liquid has reached the m…
How to reset the AdBlue warning light on the KIA Sportage?
How to reset the AdBlue warning light on the KIA Sportage?
Kia Sportage (2016-2022 / QL, MK 4) If the AdBlue warning light has illuminated on the instrument panel of your KIA Sportage, it means that the emissions control system has reached the …

Other guides you may be interested in

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos