Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Faulty Switch of the Tailgate of the Kia Picanto

Model: Kia Picanto TA, MK 2 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Checks and maintenance

See other generations:
Video tutorial

If the tailgate of your Kia Picanto does not open, the problem is often the switch. To replace it, open the tailgate and remove the inner trim panel.

Unscrew the two cross-head screws (one on each side) and detach the panel. The switch is secured with four nuts (or screws) that need to be removed.

Pull out the switch and disconnect the electrical connector. Install the new switch (available on Amazon with code B0D39YN6QJ for £15.00, with free delivery), reconnect the connector and secure the nuts.

Reattach the trim panel, inserting the fastening clips first. Check the operation by pressing the switch: the tailgate should open.


Posted on 30 July 2026 by ScegliAuto


Related tutorials

How to replace the tailgate button of the Kia Picanto
Kia Picanto (2011-2018 / TA, MK 2) Below we will see the instructions that will allow us to disassemble and replace the rear trunk opening button of the Kia Picanto. First, we open the…
…
How to Remove the Rear Bumper of the Kia Picanto
How to Remove the Rear Bumper of the Kia Picanto
Kia Picanto (2011-2018 / TA, MK 2) Today, let’s discover the procedure for removing and replacing the rear bumper of the Kia Picanto in simple and quick steps. First, move to the rear …

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos