Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the tailgate button of the Kia Picanto

Model: Kia Picanto TA, MK 2 - Years 2011-2018
Part: Push button

Below we will see the instructions that will allow us to disassemble and replace the rear trunk opening button of the Kia Picanto. First, we open the trunk and start disassembling and removing the inner plastic panel, unscrewing the screws and removing the clips; then we unscrew the screws of the button and disconnect the electrical connector to remove it, as shown in the video. At this point we replace the trunk opening button with the new one, making the electrical connection and checking its operation before reassembling everything!

Posted on 26 February 2025 by ScegliAuto

This video is currently unavailable

Related tutorials

Kia Picanto (2011-2018 / TA, MK 2) Before you start, open the front door of your Kia Picanto. Begin by unclipping and removing the internal cover near the wing mirror. Next, unscrew an…
Kia Picanto (2011-2018 / TA, MK 2) If you are curious about where the OBD2 port is located on your Kia Picanto second generation (2011-2018), just pay attention to the description in t…
Kia Picanto (2011-2018 / TA, MK 2) To replace the front headlamp bulb on your Kia Picanto second series (2011-2018), follow these simple steps. First, switch off the car and lift the b…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos