Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Knob of a Kia Sportage

Model: Kia Sportage SL, MK 3 - Years 2010-2016
Part: Shift knob

Remove the knob of a Kia Sportage. Follow these steps to remove the knob: use a plastic lever to disconnect the leather gaiter frame; unscrew the knob attached to the leather gaiter. To reassemble: insert the new leather gaiter along with the knob; take the new knob and screw it onto the shaft located on the centre tunnel. Tighten the new knob until it locks onto the shaft. Secure the locking clips of the frame (where the gaiter is located). Finally, test the correct installation of the knob by moving the shaft on the centre tunnel.

Updated on 12 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Guide to disassembling the rear door panel of the Kia Sportage
Guide to disassembling the rear door panel of the Kia Sportage
Kia Sportage (2016-2022 / QL, MK 4) The following steps will show us how to disassemble the rear door panel of the Kia Sportage. First, we open the rear door of the car and start by rem…
Removing Door Panel from Kia Sportage
Removing Door Panel from Kia Sportage
Kia Sportage (2016-2022 / QL, MK 4) In this brief tutorial, you will find instructions on how to remove the door panel from a third-generation Kia Sportage. First, open the front door a…
Removing the Rear Door Panel of the Kia Sportage
Removing the Rear Door Panel of the Kia Sportage
Kia Sportage (2010-2016 / SL, MK 3) In this video tutorial, see how to remove the rear door panel of the third generation Kia Sportage in simple steps. First, open the rear door and sta…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos