Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Panel and Speaker on a Kia Sportage

Model: Kia Sportage MK 3, SL - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Speaker

See other generations:
Video tutorial

In this video, you will remove the panel and speaker from the rear door. To perform the procedure on the front door, the differences are minimal.

Start by removing the screw covers and the screws that secure the inner panel to the door, not forgetting the one inside the handle recess. The remaining supports are clip fittings, so simply apply pressure to detach the panel.

Then disconnect the electrical connectors and the one that operates the lock. Below is shown how to replace the speaker with an incompatible one. If you have retrieved an original or compatible one, simply unscrew the supports and replace it.


Updated on 18 March 2026 by ScegliAuto


Related tutorials

Removing the Thermostat on a Kia Sportage
Removing the Thermostat on a Kia Sportage
Kia Sportage (2004-2010 / MK 2, KM) Watch the following video to learn how to remove the thermostat on a Kia Sportage. Remove the engine soundproofing panel and the ventilation hose loc…
Where is the OBD port located in the Kia Sportage?
Where is the OBD port located in the Kia Sportage?
Kia Sportage (2010-2016 / MK 3, SL) In order to find the appropriate OBD port inside your Kia Sportage, you simply need to follow these steps. It is a procedure that anyone can do and d…
How to Reset the TPMS Light on a Kia Sportage
How to Reset the TPMS Light on a Kia Sportage
Kia Sportage (2010-2016 / MK 3, SL) The TPMS light on the Kia Sportage activates when it’s necessary to adjust the tyre pressure. To adjust the tyre pressure, use a pressure gauge and a…

How to Set the Time on an Audi A6

Briefly, we will see the instructions to set the time on the Audi A6 by following these simple steps. First, get inside the vehicle and turn on the instrument cluster; then press the settings button and navigate to the time option to confirm your choice, as shown in the video. At this point, set the correct time and format, then exit the settings menu to save the changes made; finally, start the engine and ensure that the time has been set correctly!

Watch the video!


by ScegliAuto

More videos