Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Kia
    3. :
  3. Sportage
    4. : Replacement of the Silent Block of the Kia Sportage

Kia Sportage - Video tutorial

Model: Kia Sportage SL, MK 3 - Years 2010-2016
Part: Bushings
Operation: Replacement of the Silent Block of the Kia Sportage

Replacement of the silent block of our Kia? We lift the car with a jack and see the disassembly of the damaged piece. We loosen the wheel pins with a telescopic wrench, then remove the wheel. Unscrew the lower arm clamping pin and the pin mounted under the wheel hub with a socket wrench, unscrew the pins of the upper arm as shown in the video. We remove the arm from the seat, separate the silent block. We always compare the parts to be replaced with new ones, if they are suitable, we can assemble them. We mount the silent block inside the arm, tighten all the bolts to the given threads. We assemble the wheel after replacing the parts.


Posted on 22 December 2023 by ScegliAuto



Where is the fuse box of the new Kia Sportage Hybrid located?
Kia Sportage (2021-2024 / NQ5, MK 5) In this new guide dedicated to the new Kia Sportage Hybrid, we will discover where the box containing all the fuses of your new Kia Sportage Hybrid i
How do you replace the thermostat in the Kia Sportage?
Kia Sportage (2004-2010 / MK 2, KM) In order to replace the thermostat of the Kia Sportage, it is necessary to open the hood so that you have access to the components inside the engine
How to replace the cabin air filter of the Kia Sportage 2022.
Kia Sportage (2021-2024 / NQ5, MK 5) The procedure required to correctly complete the replacement of the cabin air filter in your 2022 Kia Sportage only takes a few minutes. You just nee

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos