Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Kia
    3. :
  3. Sorento
    4. : Rear light bulb replacement

Kia Sorento - Video tutorial

Model: Kia Sorento MK 2 - Years 2009-2014
Part: Rear light bulb
Operation: Rear light bulb replacement

To replace the lamp you only need a screwdriver and a wrench. To replace the bulb it is necessary to disassemble the entire lighting assembly. The screws are accessible near the lighthouse on the side. After removing the two screws, remove the light by first removing the connector. Once the light has been removed, remove the four screws to access the lamp holders. Carefully remove the cover and replace the defective bulb by pressing it lightly and turning it counterclockwise until it releases. Put the new bulb back using one with the same characteristics. Refit the screws of the lamp holders and reposition the lamp unit in the housing by connecting the relative connector. Carefully tighten the screws.


Posted on 14 July 2023 by ScegliAuto



How to replace a Kia Sorento rear light bulb
Kia Sorento (2014-2020 / MK 3) In our new mini guide dedicated to your Kia Sorento (year 2014-2020) we will find out what are the various steps to take if you want to replace the r
How do you replace the third brake light bulb on the Kia Sorento?
Kia Sorento (2002-2009 / MK 1) In order to replace the third brake light bulb on the Kia Sorento, you need to open the tailgate so that you can loosen the screws that fix the inter
How to change the ceiling light bulb of a Kia Sorento
Kia Sorento (2009-2014 / MK 2) Let's see how to change the damaged bulb in the ceiling light of a Kia Sorento. With a screwdriver we pry between the transparent plastic of the ceil

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos