Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Cabin Light Bulb

Model: Kia Soul MK 1 - Years 2008-2014
Part: Interior dome light bulb

To replace the cabin light bulb, first detach the light unit by prising along the edges between the frame and the glass of the light unit itself (take care to avoid damage: it is preferable to use a plastic lever).
Once the light unit is removed, you can replace the bulb: if you opt for an LED bulb, remember to observe the polarity to ensure it lights up (if it doesn't light, rotate the bulb by 180°).
Once the bulb is confirmed to be working, refit the light unit by gently inserting the fixing tabs.

Updated on 7 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Interior Light Bulb
Replacing the Interior Light Bulb
Kia Soul (2008-2014 / MK 1) Replacing the interior light bulb is very simple but requires caution as you are dealing with snap-fit components. Start by prying with a suitable to…
Replacement of Front Headlight Bulb
Replacement of Front Headlight Bulb
Kia Soul (2008-2014 / MK 1) Open the front bonnet and remove the protective cap located behind the headlight, disconnect the connector attached to the bulb, and extract the bulb…
Replacing the Boot Light Bulb
Replacing the Boot Light Bulb
Kia Soul (2008-2014 / MK 1) To replace the bulb in the boot, use a plastic lever to detach the translucent cover of the lamp holder and access the tubular type bulb: if the orig…

How to reset the tyre pressure warning light on the Citroën DS4?

The tyre pressure warning light on the Citroën DS4 can be reset by inflating the tyres until they reach the corresponding pressure value, which is indicated on the sticker attached to the driver's door pillar. Once all tyres are at this value, turn on the ignition by inserting the key into the ignition switch; this should make the warning light disappear from the dashboard. If it does not reset, start the engine and drive to allow the sensors to read the new values.

Watch the video!


by ScegliAuto

More videos