Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Boot Light Bulb

Model: Kia Soul MK 1 - Years 2008-2014
Part: Light bulb

Video tutorial
Detailed instructions - To replace the bulb in the boot, use a plastic lever to detach the translucent cover of the lamp holder and access the tubular type bulb: if the original bulb is lit, be very careful when removing it as it will certainly be very hot since it is an incandescent bulb; once the original bulb is removed, insert the LED bulb, and if it does not light up immediately, rotate it 180 degrees to reverse the polarity; then reattach the cover and insert the lamp holder back into its place.

Updated on 16 February 2026 by ScegliAuto


Related tutorials

Replacing the Cabin Light Bulb
Replacing the Cabin Light Bulb
Kia Soul (2008-2014 / MK 1) To replace the cabin light bulb, first detach the light unit by prising along the edges between the frame and the glass of the light unit itself (tak…
Replacing the Interior Light Bulb
Replacing the Interior Light Bulb
Kia Soul (2008-2014 / MK 1) Replacing the interior light bulb is very simple but requires caution as you are dealing with snap-fit components. Start by prying with a suitable to…
How to Open the Stuck Boot on a KIA Soul?
How to Open the Stuck Boot on a KIA Soul?
Kia Soul (2008-2014 / MK 1) In the KIA Soul, the boot may become stuck, for example, due to a fault with the control button or the lock actuator. In these cases, perform the eme…

How to reset the tyre pressure warning light on the Citroën DS4?

The tyre pressure warning light on the Citroën DS4 can be reset by inflating the tyres until they reach the corresponding pressure value, which is indicated on the sticker attached to the driver's door pillar. Once all tyres are at this value, turn on the ignition by inserting the key into the ignition switch; this should make the warning light disappear from the dashboard. If it does not reset, start the engine and drive to allow the sensors to read the new values.

Watch the video!


by ScegliAuto

More videos