Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Front Headlight Bulb

Model: Kia Soul MK 1 - Years 2008-2014
Part: Headlight bulb

Open the front bonnet and remove the protective cap located behind the headlight, disconnect the connector attached to the bulb, and extract the bulb from its socket by turning it (bayonet fitting). Insert the new bulb, avoiding touching the glass with your fingers; seat it in its socket and connect the corresponding power connector; then check its operation by turning on the headlights and finally replace the cap. If you notice a significant difference in brightness and colour compared to the other headlight, it may be advisable to replace the other bulb as well.

Updated on 6 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Front Headlight Bulb on a Kia Soul
Replacing the Front Headlight Bulb on a Kia Soul
Kia Soul (2019-2026 / SK3) In this guide, we will discover the instructions on how to remove and replace the front headlight bulb on a Kia Soul. First, move to the side and sta…
Replacing Fog Light Bulbs in a Kia Soul
Replacing Fog Light Bulbs in a Kia Soul
Kia Soul (2008-2014 / MK 1) Remove the front fog light bulbs if they are blown. Here’s how to replace the fog light bulbs in a Kia Soul. Access the light located in the front bu…
How to Replace the Front Headlamp of a Kia Soul
How to Replace the Front Headlamp of a Kia Soul
Kia Soul (2013-2018 / MK 2) Before you start, open the bonnet of your Kia Soul. Begin by unscrewing and removing the bolts that secure the front headlamp to the vehicle. Next, d…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos