Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Door Panel for Replacement

Model: Kia Picanto MK 1, 2A - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Door trim panel

See other generations:
Video tutorial

The tools needed for this operation are: a flathead screwdriver, a Phillips screwdriver, a Torx key, and a spatula. Remove the handle cover and unscrew the retaining screws.

Also, unscrew all the screws from the panel and, using the spatula, gently remove the panel along the edges, carefully pulling it upwards. Carefully disconnect the electrical contacts by unplugging the connectors, taking care not to pull them.

Refit the new panel starting with the connection of the electrical wires. Position the panel upwards and then push it down until it clicks into place.

Reinsert the screws.


Updated on 8 February 2026 by ScegliAuto


Related tutorials

How to Remove the Driver's Door Panel on a Kia Picanto
How to Remove the Driver's Door Panel on a Kia Picanto
Kia Picanto (2004-2011 / MK 1, 2A) How to remove the driver's door panel on a Kia Picanto? Follow these steps: before starting the disassembly, disconnect the battery terminals located…
How to Replace the Wing Mirror on a Kia Picanto
How to Replace the Wing Mirror on a Kia Picanto
Kia Picanto (2011-2018 / TA, MK 2) Before you start, open the front door of your Kia Picanto. Begin by unclipping and removing the internal cover near the wing mirror. Next, unscrew an…
How to Remove the Speaker from a Kia Picanto
How to Remove the Speaker from a Kia Picanto
Kia Picanto (2011-2018 / TA, MK 2) To remove the speaker from a Kia Picanto, first take off the door panel. Before starting, disconnect the battery terminals in the engine bay. Use a s…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos