Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Kia
    3. :
  3. Picanto
    4. : How to remove the driver's side door panel on Kia Picanto

Kia Picanto - Video tutorial

Model: Kia Picanto MK 1, 2A - Years 2004-2011
Part: Door panel
Operation: How to remove the driver's side door panel on Kia Picanto

How to remove the driver's side door panel on Kia Picanto? Let's see together in this video how to proceed: before starting the disassembly work, let's disconnect the battery terminals in the engine compartment. Let's start the disassembly: remove the plastic screw cap with a lever, unscrew the screws located in the door panel handle, then, with a screwdriver, unscrew the tightening screws placed on the plastic panel. Once all the screws have been removed, we detach the plastic clips that block the door. We remove the door panel by hand, unhook any power supply terminals and release cable. We carry out the necessary maintenance in the door by ungluing the adhesive protection.


Posted on 17 October 2023 by ScegliAuto



How to replace the side mirror on a Kia Picanto
Kia Picanto (2011-2018 / TA, MK 2) Before we can start, we will have to go and open the front door of our Kia Picanto. So let's start by disengaging and removing the internal cover pla
Where is the OBD2 port located in the Kia Picanto 2?
Kia Picanto (2011-2018 / TA, MK 2) If you are curious to know where the OBD2 port is located on your second-generation Kia Picanto (year 2011-2018), then you just need to pay attention
How to open the engine hood in the KIA Picanto?
Kia Picanto (2018-2024 / JA, MK 3) As we can see in this tutorial, opening the engine hood in the KIA Picanto is a very simple and quick operation. In fact, the procedure is not differ

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos