Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembling the Rear Door Panel on a Kia Picanto

Model: Kia Picanto 2A, MK 1 - Years 2004-2011
Part: Door trim panel

In this video tutorial, see how to disassemble the rear door panel on a first-generation Kia Picanto by following these simple steps. First, open the rear door and use something thin, like a plastic lever, to remove the covers that hide the screws; then unscrew all the fixing screws found underneath (on the opening handle and the grab handle). At this point, remove the handle and disconnect the cable located at the back; finally, remove the window handle to take off the panel, as shown in the video!

Updated on 3 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Driver's Door Panel on a Kia Picanto
How to Remove the Driver's Door Panel on a Kia Picanto
Kia Picanto (2004-2011 / 2A, MK 1) How to remove the driver's door panel on a Kia Picanto? Follow these steps: before starting the disassembly, disconnect the battery terminals located…
How to Replace the Wing Mirror on a Kia Picanto
How to Replace the Wing Mirror on a Kia Picanto
Kia Picanto (2011-2018 / TA, MK 2) Before you start, open the front door of your Kia Picanto. Begin by unclipping and removing the internal cover near the wing mirror. Next, unscrew an…
How to Remove the Speaker from a Kia Picanto
How to Remove the Speaker from a Kia Picanto
Kia Picanto (2011-2018 / TA, MK 2) To remove the speaker from a Kia Picanto, first take off the door panel. Before starting, disconnect the battery terminals in the engine bay. Use a s…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos