Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Speaker from a Kia Picanto

Model: Kia Picanto TA, MK 2 - Years 2011-2018
Part: Door trim panel

To remove the speaker from a Kia Picanto, first take off the door panel. Before starting, disconnect the battery terminals in the engine bay. Use a screwdriver to remove the screws securing the plastic handle and the door release lever area. Once all screws are removed, use the lever to detach the window switch panel and all plastic clips securing the door. Pull the door panel off with your hands, disconnect any power connectors and release cables. Use a screwdriver to unscrew the screws holding the speaker in the door (remove any rivets); take it out and disconnect the power connector.

Updated on 12 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Dashboard Speakers in a Kia Picanto?
How to Replace the Dashboard Speakers in a Kia Picanto?
Kia Picanto (2011-2018 / TA, MK 2) To replace the dashboard speakers in a Kia Picanto, lift the cover using a lever tool to release the retaining clips. Once the cover is removed, loos…
How to Replace the Fuel Pump on Kia Picanto
How to Replace the Fuel Pump on Kia Picanto
Kia Picanto (2004-2011 / 2A, MK 1) These brief and simple steps will guide you on how to remove and replace the fuel pump on the Kia Picanto. First, open the rear doors of the vehicle …
Where to Find the OBD2 Port on a Kia Picanto 2
Where to Find the OBD2 Port on a Kia Picanto 2
Kia Picanto (2011-2018 / TA, MK 2) If you are curious about where the OBD2 port is located on your Kia Picanto second generation (2011-2018), just pay attention to the description in t…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos