Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Dashboard Speakers in a Kia Picanto?

Model: Kia Picanto TA, MK 2 - Years 2011-2018
Part: Speaker

To replace the dashboard speakers in a Kia Picanto, lift the cover using a lever tool to release the retaining clips. Once the cover is removed, loosen the bolts securing the speaker and lift it out, disconnecting the wires connected to its rear. After removing the old speaker, insert a new one, connecting it and securing it with the appropriate bolts. After inserting the speaker, replace the cover.

Updated on 30 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Kia Picanto (2011-2018 / TA, MK 2) To remove the speaker from a Kia Picanto, first take off the door panel. Before starting, disconnect the battery terminals in the engine bay. Use a s…
Kia Picanto (2011-2018 / TA, MK 2) If the orange tyre light (TPMS) illuminates on the instrument cluster of your second-generation Kia Picanto (2015), it means there is a puncture or a…
Kia Picanto (2011-2018 / TA, MK 2) If you are curious about where the OBD2 port is located on your Kia Picanto second generation (2011-2018), just pay attention to the description in t…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos