Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Kia
    3. :
  3. Picanto
    4. : Kia Picanto stereo disassembly

Kia Picanto - Video tutorial

Model: Kia Picanto MK 1, 2A - Years 2004-2011
Part: Car stereo
Operation: Kia Picanto stereo disassembly

In the following video we will see how to disassemble the car radio in a Kia Picanto. First of all we enter the car and we will first remove all the plastic that we find on the sides of the car radio: then with some plastic levers we go to remove the frame by levering the sides in several points, also removing the control of the four arrows. We disconnect the electrical connector that we find on the back. At this point with a Phillips screwdriver we go to unscrew the screws of our car radio: then we extract the same and we go to disconnect the electrical connectors and the antenna cable.


Posted on 19 December 2023 by ScegliAuto



Disassembly of the original Kia Picanto radio
Kia Picanto (2018-2024 / JA, MK 3) Let's see how to disassemble the original car stereo of a 2018 Kia Picanto, following these simple instructions. We get on board the car and start by
How to replace the side mirror on a Kia Picanto
Kia Picanto (2011-2018 / TA, MK 2) Before we can start, we will have to go and open the front door of our Kia Picanto. So let's start by disengaging and removing the internal cover pla
Where is the OBD2 port located in the Kia Picanto 2?
Kia Picanto (2011-2018 / TA, MK 2) If you are curious to know where the OBD2 port is located on your second-generation Kia Picanto (year 2011-2018), then you just need to pay attention

    Frequently Asked Questions

    • Picanto 2011-2018 - Why does the radio no longer work on the Kia Picanto? Read Answer
    • Picanto 2018-2025 - What warning lights are there in the instrument cluster of my Kia Picanto? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos