Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Brake Pads on a Kia Mohave

Model: Kia Mohave Borrego HM - Years 2008-2019
Part: Brake pads

To replace the front brake pads on a Kia Mohave, lift the vehicle with a jack so that the wheel corresponding to the pads being replaced is not in contact with the ground. After removing the wheel, loosen the bolts that secure the brake caliper to its rotor, allowing the pads inside to be removed. This way, you can insert the new pads, secure the caliper with the appropriate bolts, and reinstall the corresponding wheel, fastening it with its bolts.

Updated on 24 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the Fuse Box Located on a Kia Mohave Borrego?
Where is the Fuse Box Located on a Kia Mohave Borrego?
Kia Mohave Borrego (2008-2015 / ) In this video tutorial, you can see where the fuse box is located on a Kia Mohave Borrego, following simple steps that will help you manage your vehi…
Guide to Removing the Kia Mohave Borrego Radio
Guide to Removing the Kia Mohave Borrego Radio
Kia Mohave Borrego (2008-2019 / HM) Discover the procedure and main steps to remove and replace the factory radio of the Kia Mohave Borrego. First, get inside the vehicle and start by r…
How to Replace the Alternator on the Kia Mohave Borrego V6
How to Replace the Alternator on the Kia Mohave Borrego V6
Kia Mohave Borrego (2008-2019 / HM) Today, you will learn how to remove and replace the alternator on the Kia Mohave Borrego V6 by following these simple instructions. First, open the h…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos