Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panel from a Kia Sportage?

Model: Kia Sportage MK 5, NQ5 - Years 2021-2026
Part: Door trim panel

Removing the door panel from a Kia Sportage involves loosening the only two screws that secure it to its housing: first, detach the plastic panel covering the screw next to the window switch panel. Then, this screw can be loosened along with the one located on the side of the corresponding door panel: when both screws are loosened, the panel can be detached from the door and its underlying connectors disconnected. After the old panel has been completely removed, you can insert the new one by connecting and securing it properly.

Updated on 21 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Door Panel from a Kia Sportage?
How to Remove the Door Panel from a Kia Sportage?
Kia Sportage (2010-2016 / SL, MK 3) To remove the door panel from a Kia Sportage, use a tool to pry off the screws that secure the panel to the corresponding door: the screws are locate…
Removing the Driver's Door Panel on a Kia Sportage
Removing the Driver's Door Panel on a Kia Sportage
Kia Sportage (2010-2016 / SL, MK 3) Want to remove the door panel of a Kia Sportage? Open the car door and locate the panel you need to remove. Unscrew the screw located in the space of…
How to Remove the Inner Door Panel of the Kia Sportage
How to Remove the Inner Door Panel of the Kia Sportage
Kia Sportage (2010-2016 / SL, MK 3) Follow the instructions below to see the steps on how to remove the front door panel of the Kia Sportage. First, open the front door of the vehicle a…

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos