Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Driver's Door Panel on a Kia Sportage

Model: Kia Sportage SL, MK 3 - Years 2010-2016
Part: Door trim panel

Want to remove the door panel of a Kia Sportage? Open the car door and locate the panel you need to remove. Unscrew the screw located in the space of the upper door handle and the screws present in the inner handle. Remove the plastic covering at the corner of the window, unscrew the remaining screws on the door panel, and detach the securing clips. Pull the panel off with your hands and disconnect it from the door (disconnect the power wiring and the opening cable). Fit a new cover panel over the door.

Updated on 1 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Door Panel on a Kia Sportage
How to Remove the Front Door Panel on a Kia Sportage
Kia Sportage (2016-2022 / QL, MK 4) Before you can start, open the front door of your Kia Sportage. Begin by disengaging and removing the panel inserts using a thin but sturdy plastic t…
Replacing the Window Switch Button of the Kia Sportage
Replacing the Window Switch Button of the Kia Sportage
Kia Sportage (2010-2016 / SL, MK 3) In this guide, see the main steps to remove and replace the window switch panel of the Kia Sportage in simple steps. First, open the front door and s…
How to Remove the Door Panel from a Kia Sportage?
How to Remove the Door Panel from a Kia Sportage?
Kia Sportage (2010-2016 / SL, MK 3) To remove the door panel from a Kia Sportage, use a tool to pry off the screws that secure the panel to the corresponding door: the screws are locate…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos