Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Door Panel on a Kia Sportage

Model: Kia Sportage QL, MK 4 - Years 2016-2022
Part: Checks and maintenance

Before you can start, open the front door of your Kia Sportage. Begin by disengaging and removing the panel inserts using a thin but sturdy plastic tool. Next, unscrew and remove the fixing screws of the door panel. Once you have removed the fixing screws, you will have freed the door panel. At this point, disengage and remove it from its housing, then disconnect the electrical connector and the handle cable, and the disassembly will be complete.

Updated on 23 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Driver's Door Panel on a Kia Sportage
Removing the Driver's Door Panel on a Kia Sportage
Kia Sportage (2010-2016 / SL, MK 3) Want to remove the door panel of a Kia Sportage? Open the car door and locate the panel you need to remove. Unscrew the screw located in the space of…
Guide to disassembling the rear door panel of the Kia Sportage
Guide to disassembling the rear door panel of the Kia Sportage
Kia Sportage (2016-2022 / QL, MK 4) The following steps will show us how to disassemble the rear door panel of the Kia Sportage. First, we open the rear door of the car and start by rem…
How to Remove the Door Panel of a Kia Sportage
How to Remove the Door Panel of a Kia Sportage
Kia Sportage (2016-2022 / QL, MK 4) How do you remove the door panel of a Kia Sportage? This video shows how to proceed. Before starting the disassembly, disconnect the battery terminal…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos