Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Kia
    3. :
  3. Forte K3
    4. : How to change interior ceiling light bulbs on a Kia Forte K3

Kia Forte K3 - Video tutorial

Model: Kia Forte K3 MK  2, YD - Years 2013-2018
Part: Checks and maintenance
Operation: How to change interior ceiling light bulbs on a Kia Forte K3

How to change the front interior light bulbs of the Kia Forte: We equip ourselves with a small screwdriver and with a certain kindness we remove the driver's side ceiling light. We do the same with the one on the passenger side. We can also do the same for the central ceiling light, which illuminates the rear sofa, even if it would be better to do it from the latter, otherwise the work will end up badly, because we will be forced to work backwards. At this point it will be very easy to remove the LED bulb, because you just need to take it with your fingers - we always recommend wearing a glove for safety - to remove it from its housing and change it. Easy and fast.


Posted on 18 May 2023 by ScegliAuto



To reset the oil light on the 2015 Kia Forte.
Kia Forte K3 (2013-2018 / MK  2, YD) The procedure required to successfully complete the manual reset of the oil light on your 2015 Kia Forte is really simple and takes a few seconds to
How to replace the sidelight bulbs in the KIA Forte?
Kia Forte K3 (2018-2024 / MK  3, BD) In this tutorial we can see how to replace the position light bulbs in the KIA Forte, a very simple and fast operation. First of all let's make sure
How to replace the headlight bulbs of the Kia Forte K3
Kia Forte K3 (2018-2024 / MK  3, BD) Let's see in this guide how to remove and replace the headlight bulbs of the Kia Forte K3, following the instructions below. First of all we open the

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos