Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Kia
    3. :
  3. Forte K3
    4. : How to replace the sidelight bulbs in the KIA Forte?

Kia Forte K3 - Video tutorial

Model: Kia Forte K3 MK  3, BD - Years 2018-2024
Part: Headlight bulb
Operation: How to replace the sidelight bulbs in the KIA Forte?

In this tutorial we can see how to replace the position light bulbs in the KIA Forte, a very simple and fast operation. First of all let's make sure that the key is not inserted, in order to operate in complete safety, and lift the front part of the car with a jack. Next, we unlock the indicated clips and remove the lower engine compartment cover, thus gaining access to the rear of both headlights. At this point, we can extract the bulbs from the housing by turning them about 45 degrees counterclockwise. Finally, we follow the reverse procedure to put everything back together.


Posted on 22 May 2024 by ScegliAuto



How to replace the headlight bulbs of the Kia Forte K3
Kia Forte K3 (2018-2024 / MK  3, BD) Let's see in this guide how to remove and replace the headlight bulbs of the Kia Forte K3, following the instructions below. First of all we open the
How to change interior ceiling light bulbs on a Kia Forte K3
Kia Forte K3 (2013-2018 / MK  2, YD) How to change the front interior light bulbs of the Kia Forte: We equip ourselves with a small screwdriver and with a certain kindness we remove the
Where is the fuse box of the Kia Forte 2023 located?
Kia Forte K3 (2018-2024 / MK  3, BD) To successfully find the fuse box inside your 2023 Kia Forte third generation, simply follow the instructions described in our new mini guide. First,

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos