Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Kia
    3. :
  3. Forte K3
    4. : How to replace the license plate light bulb on Kia Forte K3

Kia Forte K3 - Video tutorial

Model: Kia Forte K3 MK  3, BD - Years 2018-2024
Part: Light bulb
Operation: How to replace the license plate light bulb on Kia Forte K3

If we intend to replace the rear license plate lighting lamp with an equivalent lamp but of the LED type, we can follow the instructions given in this description and also take a look at the images in the video tutorial. After purchasing an aftermarket led number plate lamp compatible with this type of car, we proceed to lift the rear door and with a screwdriver proceed to unscrew the lamp support screw and disconnect the power supply terminal. Then take the new lamp holder and place it in its housing after connecting the clamp. Finally retighten the screw and the work is completed.


Posted on 21 May 2024 by ScegliAuto



Kia Forte headlight bulb replacement
Kia Forte K3 (2018-2024 / MK  3, BD) In this short guide we will see the necessary instructions on how to disassemble and replace the Kia Forte headlight bulb. First of all, we open the
How to replace the headlight bulbs of the Kia Forte K3
Kia Forte K3 (2018-2024 / MK  3, BD) Let's see in this guide how to remove and replace the headlight bulbs of the Kia Forte K3, following the instructions below. First of all we open the
To reset the oil light on the 2015 Kia Forte.
Kia Forte K3 (2013-2018 / MK  2, YD) The procedure required to successfully complete the manual reset of the oil light on your 2015 Kia Forte is really simple and takes a few seconds to

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos