Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Headlight Bulb on the Kia Forte

Model: Kia Forte K3 MK  3, BD - Years 2018-2025
Part: Headlight bulb

In this brief guide, you will find the necessary instructions on how to remove and replace the headlight bulb on the Kia Forte. First, open the hood of your car and start by removing the plastic cover protecting the bulbs. Next, disconnect the socket connector along with the bulb by unplugging the wiring, as shown in the video. At this point, install the new low beam bulb of the correct type and with the same base. Then, reassemble the lamp onto the headlight assembly and connect it!

Updated on 30 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Headlight Bulbs on the Kia Forte K3
How to Replace the Headlight Bulbs on the Kia Forte K3
Kia Forte K3 (2018-2025 / MK  3, BD) This guide shows you how to remove and replace the headlight bulbs on the Kia Forte K3, following the instructions below. First, open the hood of you…
How to Replace the Headlight Bulbs in the KIA Forte?
How to Replace the Headlight Bulbs in the KIA Forte?
Kia Forte K3 (2018-2025 / MK  3, BD) In this tutorial, you will see how to replace the headlight bulbs in the KIA Forte, a very simple and quick operation. First, ensure that the instrum…
How to Change the Interior Dome Light Bulbs on a Kia Forte K3
How to Change the Interior Dome Light Bulbs on a Kia Forte K3
Kia Forte K3 (2013-2018 / MK  2, YD) To change the front interior light bulbs on the Kia Forte, grab a small screwdriver and gently remove the driver-side dome light. Do the same for the…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos