Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Kia
    3. :
  3. Forte K3
    4. : How to disassemble the rear light in the KIA Forte?

Kia Forte K3 - Video tutorial

Model: Kia Forte K3 MK  3, BD - Years 2018-2024
Part: Tail light
Operation: How to disassemble the rear light in the KIA Forte?

As we can see in this tutorial, removing the rear light on a KIA Forte is an extremely simple and fast operation. Before proceeding, let's make sure that the key is not inserted in order to operate safely. Let's start by opening the tailgate, after which we remove the small panel located on the back of the lighthouse to be disassembled. Once this is done, unscrew the four fixing nuts with a 10mm wrench, disconnect the connector, grab the light and extract it from the bodywork. At this point we can proceed with the replacement of the damaged element.


Posted on 5 June 2023 by ScegliAuto



To reset the oil light on the 2015 Kia Forte.
Kia Forte K3 (2013-2018 / MK  2, YD) The procedure required to successfully complete the manual reset of the oil light on your 2015 Kia Forte is really simple and takes a few seconds to
How to disassemble the starter motor of the Kia Forte K3
Kia Forte K3 (2013-2018 / MK  2, YD) In this guide, let's find out the steps on how to disassemble and replace the starter motor of the Kia Forte K3, following the instructions below. Fi
How to change interior ceiling light bulbs on a Kia Forte K3
Kia Forte K3 (2013-2018 / MK  2, YD) How to change the front interior light bulbs of the Kia Forte: We equip ourselves with a small screwdriver and with a certain kindness we remove the

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos