Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install a Rear Spoiler on a Kia Forte K3

Model: Kia Forte K3 MK  3, BD - Years: 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Body

See other generations:
Video tutorial

If you intend to customize your vehicle by installing an additional rear spoiler, you can purchase an aftermarket model compatible with your car. Follow these instructions for installation. First, position the spoiler to check its placement and centering relative to the trunk.

Then, remove the protective film from the adhesive and place the spoiler on the body. To ensure optimal adhesion, apply pressure with your hands, and the job is complete.


Updated on 7 July 2026 by ScegliAuto


Related tutorials

How to Reset the Oil Light on the 2015 Kia Forte
How to Reset the Oil Light on the 2015 Kia Forte
Kia Forte K3 (2013-2018 / MK  2, YD) The procedure to manually reset the oil light on your 2015 Kia Forte is very simple and takes only a few seconds to complete. First, go inside the ca…
How to Remove the Rear Headlight on the KIA Forte?
How to Remove the Rear Headlight on the KIA Forte?
Kia Forte K3 (2018-2025 / MK  3, BD) As seen in this tutorial, removing the rear headlight on the KIA Forte is an extremely simple and quick operation. Before proceeding, ensure the key …
How to Replace the Key Battery of the 2017 Kia Forte
How to Replace the Key Battery of the 2017 Kia Forte
Kia Forte K3 (2013-2018 / MK  2, YD) In this guide, you will learn how to quickly replace the battery inside your 2017 Kia Forte key. First, purchase a new CR2032 battery and make sure y…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos