Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Make a Quick Repair on the Bodywork of a Kia Vehicle

Model: Kia KIA Various
Part: Body

In this video, we will show you how to make a quick repair for a small dent on the bodywork of a Kia vehicle. First, isolate the area to be treated with masking tape. Sand the area with abrasive paper, starting with P180, then P240, and P400, gradually treating a larger area until reaching P600. Finish with P3000, expanding the area further. Isolate a sufficiently large area and apply primer lightly, then the base coat. Allow it to dry thoroughly. Next, choose the exact colour for your vehicle and sand with P800. Apply a first coat and let it dry, then a second coat, and finally apply the clear coat (two coats), blending well. Remove any excess with P3000, and then polish with abrasive paste.

Updated on 23 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Cabin Filter on the Kia K5?
How to Replace the Cabin Filter on the Kia K5?
Kia KIA Various In this new mini guide dedicated to your Kia K5, we will discover how to quickly and safely replace the cabin air filter. Please remember that the en…
Resetting the Service Light on the Kia K5
Resetting the Service Light on the Kia K5
Kia KIA Various In this short and simple guide, you will find instructions to reset the maintenance light for the engine oil change on the Kia K5. First, get inside …
Battery replacement for Kia K5
Battery replacement for Kia K5
Kia KIA Various Below we will see the instructions that will allow us to disassemble and replace the battery of the Kia K5, in simple and quick steps. First of all, …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos