Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlamp Bulb on the Kia Sportage 4

Model: Kia Sportage QL, MK 4 - Years 2016-2022
Part: Headlight bulb

To correctly replace the front headlamp bulb on your Kia Sportage fourth generation (2016-2022), carefully read the following guide and follow the described steps. First, lift the bonnet of the car and position yourself in front of the headlamp containing the bulb to be replaced. At this point, remove the protective cap located at the rear of the headlamp and locate the bulb holder. Once done, remove it as well and proceed to replace the faulty bulb with a new one. Finally, refit everything and you are finished.

Updated on 24 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to remove the headlight bulb from the 2018 Kia Sportage
How to remove the headlight bulb from the 2018 Kia Sportage
Kia Sportage (2016-2022 / QL, MK 4) Replacing the left headlight bulb of the 2018 Kia Sportage is a straightforward task that can be done independently. The first step is to open the bo…
How to replace the headlight bulb on the 2016 Kia Sportage
How to replace the headlight bulb on the 2016 Kia Sportage
Kia Sportage (2010-2016 / SL, MK 3) Replacing the right headlight bulb on a 2016 Kia Sportage follows very simple steps that can be done independently. The first step is to open the fro…
How to replace the headlight bulb of the 2012 Kia Sportage
How to replace the headlight bulb of the 2012 Kia Sportage
Kia Sportage (2010-2016 / SL, MK 3) In the following guide, we will help you complete the replacement of the front headlight bulb in your Kia Sportage (2012). First of all, park the car…

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos