Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the headlight bulb on the 2016 Kia Sportage

Model: Kia Sportage SL, MK 3 - Years 2010-2016
Part: Headlight bulb

Replacing the right headlight bulb on a 2016 Kia Sportage follows very simple steps that can be done independently. The first step is to open the front bonnet by pulling the lever under the steering wheel. The second step is to remove the cover. The third step is to remove the bulb and disconnect the connector. The fourth step is to insert the new bulb into the connector. The fifth step is to close the cover. To replace the left headlight bulb, follow the same steps indicated previously.

Updated on 6 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Headlamp to Replace the Position Bulb on the Kia Sportage Mk2
How to Remove the Front Headlamp to Replace the Position Bulb on the Kia Sportage Mk2
Kia Sportage (2004-2010 / MK 2, KM) This guide shows how to remove the front headlamp of the Kia Sportage Mk2. With the bonnet open, remove the plastic fastening pins of the front casin…
How to Reset the Tyre Pressure Warning Light on a 2014 Kia Sportage
How to Reset the Tyre Pressure Warning Light on a 2014 Kia Sportage
Kia Sportage (2010-2016 / SL, MK 3) The 2014 Kia Sportage offers a very simple way to reset the tyre pressure warning light; there is no need to go to a garage or use electronic equipme…
How to Reset the Service Light on a 2016 Kia Sportage
How to Reset the Service Light on a 2016 Kia Sportage
Kia Sportage (2010-2016 / SL, MK 3) Resetting the service light on a 2016 Kia Sportage is a straightforward task that takes just a few minutes. Start by turning on the instrument cluste…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos