Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Kia
    3. :
  3. Niro
    4. : Guide to replacing the front turn signal bulb of the Kia Niro.

Kia Niro - Video tutorial

Model: Kia Niro MK 1 - Years 2016-2023
Part: Headlight bulb
Operation: Guide to replacing the front turn signal bulb of the Kia Niro.

Today's steps will show us how to disassemble and replace the turn signal bulb of the Kia Niro's front headlight, following the instructions below. First, we open the car's engine hood and begin by disconnecting the electrical connector of the turn signal light, removing the bulb along with the socket. Then, we replace the bulb with the new one, as shown in the video. At this point, we correctly install and insert the bulb into the socket, finally reassembling the socket onto the headlight assembly, following the video tutorial until the end!


Posted on 26 January 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos