Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Kia
    3. :
  3. Kia Niro
    4. : Headlight bulb

Kia Niro - Headlight bulb

Kia Niro (2016-2023 / MK 1)
Guide to replacing the front turn signal bulb of the Kia Niro.
Today's steps will show us how to disassemble and replace the turn signal bulb of the Kia Niro's front headlight, following the instructions below. First, we …read all…
Posted on 26 January 2024 by ScegliAuto
Kia Niro (2016-2023 / MK 1)
How do you replace the Kia Niro headlight bulb?
In order to replace the Kia Niro headlight bulb, you will have to open the bonnet, in order to access the inside of the headlight corresponding to the bulb …read all…
Posted on 7 December 2022 by ScegliAuto
Kia Niro (2016-2023 / MK 1)
How to replace the headlight bulb on the Kia Niro?
To be able to replace the headlight bulb of the Kia Niro you need to open the hood, so that you can have access to the internal part of the corresponding …read all…
Posted on 9 August 2022 by ScegliAuto
Airbags (1) Battery (2) Key (4) -board computer (4) Checks and maintenance (9) Cabin air filter (1) Light bulb (1) Headlight bulb (3) Antifreeze liquid (2) Door panel (1) Instrument cluster (3) Windscreen wipers (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos