Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Kia
    3. :
  3. Niro
    4. : How do you replace the Kia Niro headlight bulb?

Kia Niro - Video tutorial

Model: Kia Niro MK 1 - Years 2016-2023
Part: Headlight bulb
Operation: How do you replace the Kia Niro headlight bulb?

In order to replace the Kia Niro headlight bulb, you will have to open the bonnet, in order to access the inside of the headlight corresponding to the bulb that needs to be replaced: here you will find the headlight cover, which must be rotated and removed in order to to access the connector below. By disconnecting the latter it will be possible to extract the bulb from its housing, replacing it with a new one: this must be connected to the connector and inserted in the headlight, then closing it with the relative cover. This way you can close the hood to check that everything is working properly.


Posted on 7 December 2022 by ScegliAuto



How to replace the headlight bulb on the Kia Niro?
Kia Niro (2016-2023 / MK 1) To be able to replace the headlight bulb of the Kia Niro you need to open the hood, so that you can have access to the internal part of the correspon
Guide to replacing the front turn signal bulb of the Kia Niro.
Kia Niro (2016-2023 / MK 1) Today's steps will show us how to disassemble and replace the turn signal bulb of the Kia Niro's front headlight, following the instructions below. F
How to replace the front headlight bulbs of the Kia Niro
Kia Niro (2016-2023 / MK 1) Today's instructions will show us how to disassemble and replace the front headlight bulbs of the Kia Niro. First, we open the hood and start by remo

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos