Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace halogen lights with LED lights on the front headlights of a Kia Niro

Model: Kia Niro SG2 - Years: 2021, 2022, 2023, 2024, 2025, 2026
Part: Headlight

See other generations:
Video tutorial

Replacing halogen lights with LED lights has never been easier, just a little patience is needed. First, turn off the car and open the hood, behind the headlights you will find a plastic cap, you need to unscrew it. Now you will see the halogen bulb, which usually has a spring clip or a connector.

Carefully disconnect it without touching the glass and unplug the connector. Take the new LED bulb and connect it to the original connector.

Be careful, if the LED does not light up, try reversing the polarity. Insert the bulb into the headlight, secure it properly and put the cap back on. Repeat for the other side and test the lights before closing the hood.

This whole procedure is aimed at providing greater visibility and a more modern look to your car. If you do not feel comfortable doing it yourself, contact a professional workshop.


Posted on 25 September 2025 by ScegliAuto


Related tutorials

How to Replace the Front Headlamp Bulbs on a Kia Niro
How to Replace the Front Headlamp Bulbs on a Kia Niro
Kia Niro (2016-2023 / MK 1) Today's instructions will show you how to dismantle and replace the front headlamp bulbs on a Kia Niro. First, open the bonnet and start by removing …
How to replace interior and number plate lights with LED lights on a Kia Niro
How to replace interior and number plate lights with LED lights on a Kia Niro
Kia Niro (2016-2023 / MK 1) To replace the interior lights and number plate lights of the Kia Niro with LED ones, start with the number plate lights: unscrew the screw securing …
How to adjust the headlights of the Kia Niro?
How to adjust the headlights of the Kia Niro?
Kia Niro (2016-2023 / MK 1) To adjust the headlights of the Kia Niro, enter the cabin and switch on the instrument panel with the appropriate key: on the lower left side of the …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos