Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlamp Bulbs on a Kia Niro

Model: Kia Niro MK 1 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Headlight bulb

See other generations:
Video tutorial

Today's instructions will show you how to dismantle and replace the front headlamp bulbs on a Kia Niro. First, open the bonnet and start by removing the plastic protective cap of the bulbs; then disconnect the electrical connector of the lights, as shown in the video.

At this point, remove the bulb from the holder and replace it with a new one of the correct type and fitting; test the operation of the dipped beam bulb, and finally refit the protective cap, applying the same procedure for replacing the other bulbs!


Updated on 1 October 2026 by ScegliAuto


Related tutorials

How to adjust the headlights of the Kia Niro?
How to adjust the headlights of the Kia Niro?
Kia Niro (2016-2023 / MK 1) To adjust the headlights of the Kia Niro, enter the cabin and switch on the instrument panel with the appropriate key: on the lower left side of the …
How to Replace the Rear Wiper Blade on the Kia Niro
How to Replace the Rear Wiper Blade on the Kia Niro
Kia Niro (2016-2023 / MK 1) Briefly, here are the steps to remove and replace the rear wiper blade on the Kia Niro. First, go to the back of the vehicle and lift the rear wiper …
How to Change the Time on Kia Niro
How to Change the Time on Kia Niro
Kia Niro (2021-2026 / SG2) Today, you will see the instructions that will allow you to change the time on the central display of the Kia Niro. First, get inside the vehicle and…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos