Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the front headlight of the Kia Niro

Model: Kia Niro MK 1 - Years 2016-2023
Part: Headlight

Today we will explain how to remove the front headlight of a Kia Niro, produced from 2017 to 2023. To perform the headlight removal, we need to use 13mm keys. Unscrew the two nuts located on the top of the headlight. Release the bottom part of the bumper in order to release the bottom part of the headlight. Disconnect the connector and remove the headlight. After removing the headlight, it is possible to perform the operation of replacing the bulbs or other maintenance on the front bumper. To perform the removal of the right front headlight, we follow the same steps. The headlight assembly follows the reverse procedure.

Posted on 7 August 2025 by ScegliAuto

Video tutorial

Related tutorials

Guide to Replacing the Front Indicator Bulb on the Kia Niro
Guide to Replacing the Front Indicator Bulb on the Kia Niro
Kia Niro (2016-2023 / MK 1) Today’s steps will show you how to remove and replace the front indicator bulb of the Kia Niro, following the instructions below. First, open the bon…
How to Change the Time on Kia Niro
How to Change the Time on Kia Niro
Kia Niro (2021-2026 / SG2) Today, you will see the instructions that will allow you to change the time on the central display of the Kia Niro. First, get inside the vehicle and…
How to Replace the Rear Wiper Blade on the Kia Niro
How to Replace the Rear Wiper Blade on the Kia Niro
Kia Niro (2016-2023 / MK 1) Briefly, here are the steps to remove and replace the rear wiper blade on the Kia Niro. First, go to the back of the vehicle and lift the rear wiper …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos