Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Bulbs on the Kia Niro MK2

Model: Kia Niro SG2 - Years: 2021, 2022, 2023, 2024, 2025, 2026
Part: Light bulb

See other generations:
This video is currently unavailable

In this video, we will see how to replace the bulb on the Kia Niro MK2: opening the bonnet does not allow access from above as there is no space to reach the bulbs. Therefore, it is essential to remove the lower wheel arch liners.

There are nine clips, seven are visible, and two are underneath. Once removed, you can access the headlight, although the access is not very convenient.

Remove the plastic cover to access the bulb; if you decide to install LED bulbs, which are longer, it is necessary to remove the internal cover of the cap to create more space inside, allowing the LED bulb to fit better.


Updated on 11 September 2026 by ScegliAuto


Related tutorials

What is the fuse diagram for the KIA Niro?
What is the fuse diagram for the KIA Niro?
Kia Niro (2016-2023 / MK 1) In this video, we can see where the fuse boxes are located in the KIA Niro and the corresponding diagrams, useful in case you need to check the fuses…
How to Replace the Front Headlamp Bulbs on a Kia Niro
How to Replace the Front Headlamp Bulbs on a Kia Niro
Kia Niro (2016-2023 / MK 1) Today's instructions will show you how to dismantle and replace the front headlamp bulbs on a Kia Niro. First, open the bonnet and start by removing …
How to Replace the Front Headlight Bulb on a Kia Niro
How to Replace the Front Headlight Bulb on a Kia Niro
Kia Niro (2016-2023 / MK 1) To replace the front headlight bulb on the Kia Niro, open the bonnet to access the inside of the corresponding headlight. You will need to remove the…

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos