Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Kia
    3. :
  3. Kia Niro
    4. : Windshield wipers

Kia Niro - Windshield wipers

Windshield Wipers Kia Niro (2016-2023 / mk 1)

Kia Niro (2016-2023 / MK 1)
How to Replace the Wipers on a Kia Niro
To replace the wipers on a Kia Niro, position the wiper arms in service mode, then lift them off the windscreen. Rotate the blade to access the fastening …Read all…
Posted on 9 June 2026 by ScegliAuto
Kia Niro (2016-2023 / MK 1)
How to Replace the Rear Wiper Blade on the Kia Niro
Briefly, here are the steps to remove and replace the rear wiper blade on the Kia Niro. First, go to the back of the vehicle and lift the rear wiper arm. Then, …Read all…
Posted on 24 May 2026 by ScegliAuto
Kia Niro (2016-2023 / MK 1)
How to Replace the Rear Wiper on the Kia Niro
This brief and simple guide provides instructions on how to remove and replace the rear wiper, as well as the front wipers, on the Kia Niro. First, move to the …Read all…
Posted on 29 August 2026 by ScegliAuto
Airbag (1) Battery (4) Key (12) Air conditioner (1) Onboard computer (5) Checks and maintenance (11) Headlight (2) Air filter (1) Cabin air filter (1) Light bulb (1) Headlight bulb (5) Antifreeze coolant (2) License plate light (1) Handle (1) Clock (3) Door trim panel (1) Brake pads (1) Fuse box (11) Warning light – error code (7) (8) Tire pressure warning light (2) Service warning light (39) Fuel cap (1) Windshield wipers (3)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos