Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Wipers on a Kia Niro

Model: Kia Niro MK 1 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Windshield wipers

See other generations:
Video tutorial

To replace the wipers on a Kia Niro, position the wiper arms in service mode, then lift them off the windscreen. Rotate the blade to access the fastening system and locate the release tab on the attachment.

Press the tab and slide the blade along the arm until it is completely removed. Take the new blade and attach it to the arm following the same orientation, pushing it until you hear a click.

Ensure the attachment is secure by gently pulling on the blade. Carefully return the arm to the windscreen to avoid damaging the glass and repeat the process on the other side.

Finally, operate the wipers to ensure they function correctly and that the new blades adhere well to the windscreen.


Posted on 9 June 2026 by ScegliAuto


Related tutorials

How to Reset the Tyre Pressure Warning Light on the Kia Niro?
How to Reset the Tyre Pressure Warning Light on the Kia Niro?
Kia Niro (2016-2023 / MK 1) To reset the Service light on the Kia Niro, inflate all tyres to the recommended pressure, which is indicated on the sticker on the driver's door pil…
How to Replace the Key Fob Battery in a Kia Niro?
How to Replace the Key Fob Battery in a Kia Niro?
Kia Niro (2016-2023 / MK 1) To replace the battery in the key fob of a Kia Niro, remove the key blade from the top of the device. Once the key blade is removed, use it to pry op…
How to Replace the Rear Wiper Blade on the Kia Niro
How to Replace the Rear Wiper Blade on the Kia Niro
Kia Niro (2016-2023 / MK 1) Briefly, here are the steps to remove and replace the rear wiper blade on the Kia Niro. First, go to the back of the vehicle and lift the rear wiper …

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos